Description
BASSBOSS SSP218 Dual 18″ Powered Subwoofer
The BASSBOSS SSP218 offers the most universal solution for those who need big bass, providing huge low end for the price.
Soul-Bending Bass
You need a rock-solid, rough and ready high-performer that keeps it coming year after year. Done.
The SSP218 offers an extremely cost-effective solution for those who need big bass for the broadest range of applications, providing huge low end for the price, and proven reliability.
Mind-Relieving Reliability
Countless gigs later, ready to boom. After beer spillage, late night-knocks, accidental mixer overloads, DJ debacles, and the regular wear and tear of providing people with a reason to dance, your SSP218s will be right there with you, ready for more.
The Original
Our original powered, double 18” subwoofer design is a combination of sensitivity, depth, power handling, fidelity and value.
Delivering massive output at and above 30Hz, reliably, consistently and with great fidelity. Modern electronic, jazz, reggae, pop and R&B music emphasize bass and put tremendous demands on low frequency loudspeakers.The SSP218 delivers the energy and power of modern music and it is built to take the stress of doing so continuously, to the extremes, without fail.
To The Max
Incorporating innovative new technologies into rigidly braced, large vented boxes that are optimized for maximum output and reliability. The SSP218 sustains its output long-term and is practically impossible to blow thanks to the combination of extremely rugged, very high power handling, long excursion drivers, carefully optimized cabinet and port design and several effective but transparent protection systems. The protection systems effectively prevent thermal overload of the voice coils and minimize long-term thermal compression while having virtually no effect on the transient response and peak output of the loudspeaker.
Very high output, low frequency sound with extremely low distortion. The SSP218 system is optimized for full-power operation and is designed to operate at full rated RMS power throughout its operating range while the woofers remain within their X-max specification.
Extremely Flat
Extremely flat, delivering response that is ±1.5dB from 32Hz to 100Hz. No equalization is required to achieve this response. Unlike designs that require equalization, the SSP218’s tone, response and sensitivity are native to the design. Systems that require processing to achieve their stated response are still subject to the physical excursion and thermal limits of their drivers.
Boosting low frequency EQ to achieve extended low-frequency response results in excessive distortion or woofer damage at full power unless limiting is applied. The limiting necessary to prevent failure also prevents the realization of their claimed frequency response at full power.
Goes Where You Do
Ideally suited for use as a professional touring subwoofer, its truck-pack dimensions are compatible with 90” and 96” truck widths and up to four boxes can be stacked and transported on a single dolly cart. This allows 16 subwoofers and their 64,000 watts of amplification to be transported in as little as 5’ of 96” wide truck space or 12 boxes and 48,000 Watts in 4’ of 90” truck space.
On their custom-fit wheel carts with locking casters, stacks of 2 or 3 SSP218s can be rolled into place and used without the need to remove them from their carts. For added flexibility, the SSP218s can be stacked on their carts facing forwards or in cardioid configuration.
.iframe-container{
position: relative;
width: 100%;
padding-bottom: 56.25%;
height: 0;
}
.iframe-container iframe{
position: absolute;
top:0;
left: 0;
width: 100%;
height: 100%;
}
Product Specification:
Loudspeaker Description: High-output Dual 18 inch Subwoofer
Frequency Response (±3 dB): 30 – 100 Hz
Maximum Sustained Output: 135 dB SPL, 1 meter, half-space (ground plane)
Max SPL (Peak): 141 dB
Nominal Dispersion (H° x V°): 360 x 360 – Cardioid Mode Available with Multiple Boxes
Amplification: 4000 Watt Continuous RMS Class D Subwoofer Amplifier
Processing: Integrated comprehensive DSP provides high pass, low pass, phase alignment and limiting
Enclosure Type: Direct radiating, vented enclosure, optimally tuned for extended low frequency response with high sensitivity and high power handling
Transducer: 2 x 18 in. diameter (457 mm) neodymium motor woofers with 4 in. (100 mm) copper winding voice coils and 56 mm (2.2″) peak to peak excursion. Waterproof fiber composite cone
Cabinet Construction: 18 mm Baltic Birch plywood, extensively braced. Equipped with 16 flypoints, 4 steel handles, 2 pole sockets, 4 large rubber feet, and 4 interlocking foot pockets
Dimensions (HxWxD): 22.5 in. x 48 in. x 29.5 in. (23.25 in. high with feet)
Net Weight: 199 lbs
Shipping Weight: 230 lbs
Reviews
There are no reviews yet.